Customization: | Available |
---|---|
Certification: | CE, ISO, MSDS |
Color: | Grey |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Crafted with cutting-edge thermoplastic polyolefin (TPO) material, our Advanced TPO Roofing Membrane combines the exceptional weldability of propylene-alpha-olefin copolymer resins derived from advanced polymerization processes with the superior durability of polypropylene resins. Canlon TPO-L stands as an advanced composite thermoplastic polyolefin polymer waterproof membrane, enhanced with a non-woven fleece backing through innovative processing technology. This membrane is ideal for fully adhered roofing systems.
Each standard roll is meticulously encapsulated in polyethylene film. The width is 2.0m, with length varying based on the membrane's thickness.
NO. | Item | Value | |||
Smooth one (Category H) |
Fiber fleece-backed (Category L) |
Reinforced with polyester scrim (Category P) | |||
1 | Thickness of resin attaching to embedded scrim/ mm ≥ | ---------- | ---------- | 0.4 | |
2 | Tensile property | Max tensile force / N/cm ≥ | ---------- | 120 | 250 |
Tensile strength/ MPa ≥ | 12.0 | ---------- | ---------- | ||
Elongation at break/ % ≥ | 500 | 250 | --------- | ||
3 | Dimensional variation after heating/ 100% ≤ | 2.0 | 1.0 | 0.5 | |
4 | Low temperature flexibility | -40ºC (no crack) | |||
5 | Impermeability | 0.3MPa, 2h , impermeable | |||
6 | Compression resistance | 0.5kg.m (no penetration) | |||
7 | Tear strength of overlapping / N/mm ≥ | 4.0 | 3.0 | ||
8 | Water absorption (70 ºC 168h) / % ≤ | 4.0 | |||
9 | Heat aging (80ºC) |
Time duration | 672h | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low-temperature flexibility | -40ºC (no crack) | ||||
10 | Chemical resistance |
Appearance | No bubble, crack, delamination, or pinhole | ||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength/ % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) | ||||
11 | Artificial Weathering |
Time duration | 1500hb) | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break / ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) |