Spray Polyurea Elastic Waterproof Coating

  • Audited Supplier
  • 7 yrs
  • leading factory

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Images of Spray Polyurea Elastic Waterproof Coating

Spray Polyurea Elastic Waterproof Coating pictures & photos
Spray Polyurea Elastic Waterproof Coating
Spray Polyurea Elastic Waterproof Coating pictures & photos
Spray Polyurea Elastic Waterproof Coating
Spray Polyurea Elastic Waterproof Coating pictures & photos
Spray Polyurea Elastic Waterproof Coating
  • Spray Polyurea Elastic Waterproof Coating
    Spray Polyurea Elastic Waterproof Coating
  • Spray Polyurea Elastic Waterproof Coating
    Spray Polyurea Elastic Waterproof Coating
  • Spray Polyurea Elastic Waterproof Coating
    Spray Polyurea Elastic Waterproof Coating

Find Similar Products

Product Description

Two components spray-up elastic coating applied in complicated weather.
Component A is a half prepolymer through the reaction between hydroxyl terminal compounds and isocyanate.
Component B is a mixture consisting of amino terminal resign and amino terminal chain extender, not including hydroxy acrylic resin and activator.

Where to use:
Railway girder concrete bridge surface;
All constructions and water conservancy projects;
Chemical vessels;
Cabins and floors of ships;
Water resistance and corrosion resistance of decks and channels;
Grades with wear resistant, impact resistant and skid resistant functions;
Large area and unnormal waterproof projects.

Advantages:
Fast curing on any surfaces, slopes and vertical planes without sagging;
Excellent bonding functions with all materials, including cements, steel plates and wood plates;
Excellent sealing quality, water resistance and penetration resistance;
Resistance to long-term acid, alkali and salt erosion;
Good thermal stability: It can be used below 100° C for a long time;
Good flexibility and mechanical properties, even in -40° C
Excellent tensile strength and elongation;.
Excellent cracks deformation resistance;.
Wear resistance and impact resistance..
Item Requirements
Solid content, % ≥ 98
Gel time, s ≤ 45
Surface drying time, s ≤ 120
Tensile strength, MPa ≥ 16.0
Elongation at break, % ≥ 400
Tear strength, N/mm ≥ 60
Fold ability at low temperature,   C ≤ -40
Water tightness, 0.4MPa × 2h Pass
Thermal tensile ratio, % Elongation ≤ 1.0
Shrinkage ≤ 1.0
Water absorptivity, % ≤ 5.0
Bonding strength on substrate, MPa Dry surface ≥ 2.5
Wet surface ≥ 2.5
Peel strength on substrate, N/mm ≥ 6.0
Hardness, Shore A ≥ 90
Resistance to impact, 100 cm No cracking, wrinkle and flaking
Wear resistance, (Akron machine) cm 3, 1.61 km ≤ 0.50
Thermal treatment Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 90% Retention rate
Fold ability at low temperature,   C ≤ -40
Alkali treatment Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 90% Retention rate
Fold ability at low temperature,   C ≤ -40
Acid treatment Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 90% Retention rate
Fold ability at low temperature,   C ≤ -40
Salt treatment Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 90% Retention rate
Fold ability at low temperature,   C ≤ -40
Oil treatment Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 90% Retention rate
UV aging, 1500 h Tensile strength retention rate  , % 80-150
Elongation at break, % ≥ 80% Retention rate
Fold ability at low temperature,   C ≤ -40
Alkali resistance, saturated Ca(OH)2 solution, 500 h No grooving, blistering and peeling
Time for heavy goods vehicles 0.6 MPa ground pressure in 24 hours

Spray Polyurea Elastic Waterproof Coating
 

About the Supplier

This supplier has been audited by BV. Verify the report on the official BV website with ID "MIC-ASR2641350". Items marked "verified" are certified.

Watch Video
Watch Video
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.
Jiangsu Canlon Building Materials Co., Ltd.

About Our Factory & Business Background

Address
No. 8, Hengtong Rd, Qidu Town, Wujiang Dist, Suzhou City Jiangsu Province, 215234, China
Terms of Payment
LC, T/T
International Commercial Terms(Incoterms)
FOB, CFR, CIF, FCA, EXW
Average Lead Time
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: within 15 workdays
Nearest Port
SHANGHAI, NINGBO, NANJING

Our Production Capability & Technical Expertise

Main Products
Waterproof Membrane, Waterproof Materials, Polyurethane Coating, Single Ply Roofing, Roofing Membrane

Our Industry Experience & Global Business Record

Export Year
2012-03-01
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now