Single Ply Roofing Membrane Tpo Waterproofing Membrane Fleece Backed

• Certification: ISO, MSDS, CE, Bba
• Color: Grey
• Material: PVC
• Type: Roofing and Waterproofing
• Ceiling Tile Shape: Roll
• Thickness: 1.5mm
• Model NO.: TPO-L
• Ceiling Tile Type: PVC Ceilings
• Surface Treatment: Roll Coated
• Function: Waterproof
• Usage: Outdoor, Indoor, Underground
• Transport Package: 10000sqm/40FT Container
• Specification: 1.5mm thickness* 2m wide*20m long
• Trademark: CANLON
• Origin: China

Product Description

General Description
CANLON TPO roofing membrane combines both polypropylene(plastic) and ethylene-propylene (rubber)using state-of-the-art extruding manufacturing technology, which exhibits excellent versatile physical properties of plastic and rubber. Featured with pliable and weldable properties, CANLON TPO delivers its unique high elasticity under normal condition and its superior plasticity under extreme temperature. Therefore its excellent physical and chemical parameters(high tensile strength and elongation) forges its unbeatable quality.
Being commercial roofing system that is reliable, cost effective,environmentally friendly and easy to install, CANLON TPO is mostly suited for single ply light steel roofs.

                                         


  
Canlon TPO membrane is available within three categories:

• H(stands for non-reinforced smooth one).
• L (stands for fiber fleece-backed one)
• P(stands for reinforced one)
   
   

CANLON TPO waterproofing membrane
Thickness(mm)	Width(m)	Length(m)	Color choice
1.2	2.0	20	white
2.0	2.0	15
2.5	2.0	10
Remarks	Warranty : 10-20 years Other sizes or colors are designed upon requirements

 
Application
Canlon TPO membrane is mainly applicable to vehicle, paper making, tobacco, textile printing and IT industry, especially applied in new roofing system or old roofing refurbishment of refrigeration house,public buildings and large-span factory that has high requirement upon temperature and humidity.
Note: Application for underground or concealed waterproofing projects is not recommended.
 
Advantages

• Ozone resistance, durable and weldable
• No containing plasticizer, because of no plasticizer oozing out, prolong service life
• No chlorinated polymer or chlorine. no chlorine emits during welding operation and installation process, so to keep people health and environment green
• Superior low temperature flexibility, no embrittlement occurs under-40ºC, long-term good performance under circumstance of -60ºCto-135ºC
• Withstand against chemicals and microorganism eroding,
• Sable light color (mainly white) and smooth surface showcase high reflectivity
• High reflectivity and strong contamination resistance
• Environment friendly, can be recyclable
   
• Installation
  Mechanically Fastened:(Hot-air welding ensure secure and seamless water barrier)
  Brief introduction 
  Mechanically attached systems are best choice when weight is a consideration, when the system is to be installed during cooler weather or when a roof is being re-covered, steel roof is an optimal choice for mechanically fastened systems, especially when installing a new roofing system over a structural standing seam metal building, as the mechanical attachment is light weight and less likely to overload the highly engineered weight limits of the building. Wood and cementitious wood fiber are also very good decks for mechanically fastened systems.
  Special fastening accessories or machines are indispensable(such as automatic welding machines, hand-held guns and rollers are) to secure the whole installation, the overlap joints will be welded by automatic hot-air machines so as to enhance the wind force loading capacity.  

                         

        Technical Data Sheet

NO.	Item		Value
			Smooth one (Category H)	Fiber fleece- backed (Category L)	Reinforced with polyester scrim (Category P)
1	Thickness of resin attaching to embedded scrim/ mm  ≥		----------	----------	0.4
2	Tensile property	Max tensile force / N/cm                            ≥	----------	120	250
		Tensile strength/ MPa                               ≥	12.0	----------	----------
		Elongation at break/ %                              ≥	500	250	---------
3	Dimensional variation after heating/  100%                  ≤		2.0	1.0	0.5
4	Low temperature flexibility		-40ºC (no crack)
5	Impermeability		0.3MPa, 2h , impermeable
6	Compression resistance		0.5kg.m (no penetration)
7	Tear strength of overlapping  /  N/mm                          ≥		4.0	3.0
8	Water absorption (70 ºC  168h) / %                              ≤		4.0
9	Heat aging (80ºC)	Time duration	672h
		Appearance	No bubble, crack, delamination, or pinhole
		Retention rate of max tensile force / %     ≥	----------	90	90
		Retention rate of tensile strength /  %       ≥	90	----------	----------
		Retention rate of elongation at break/ %   ≥	90	90	----------
		Low temperature flexibility	-40ºC (no crack)
10	Chemical resistance	Appearance	No bubble, crack,  delamination, or pinhole
		Retention rate of max tensile force / %     ≥	----------	90	90
		Retention rate of tensile strength/ %         ≥	90	----------	----------
		Retention rate of elongation at break/ %   ≥	90	90	----------
		Low temperature flexibility	-40ºC (no crack)
11	Artificial Weathering	Time duration	1500h^b)
		Appearance	No bubble, crack,  delamination, or pinhole
		Retention rate of max tensile force / %     ≥	----------	90	90
		Retention rate of tensile strength /  %       ≥	90	----------	----------
		Retention rate of elongation at break /      ≥	90	90	----------
		Low temperature flexibility	-40ºC (no crack)