Customization: | Available |
---|---|
Certification: | CE, ISO, MSDS |
Color: | Grey |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Crafted from premium thermoplastic polyolefin (TPO) material, our membrane masterfully combines the weldability of propylene-alpha-olefin copolymer resins derived from cutting-edge polymerization processes with the robustness of polypropylene resins. The Canlon TPO-L stands as a composite thermoplastic polyolefin polymer waterproof membrane, reinforced with non-woven fleece backing through advanced processing technology, specifically designed for fully adhered roofing systems.
Each standard roll is meticulously encapsulated in polyethylene film. The width is 2.0m, with length variations based on membrane thickness.
NO. | Item | Value | |||
Smooth one (Category H) |
Fiber fleece-backed (Category L) |
Reinforced with polyester scrim (Category P) | |||
1 | Thickness of resin attaching to embedded scrim/ mm ≥ | ---------- | ---------- | 0.4 | |
2 | Tensile property | Max tensile force / N/cm ≥ | ---------- | 120 | 250 |
Tensile strength/ MPa ≥ | 12.0 | ---------- | ---------- | ||
Elongation at break/ % ≥ | 500 | 250 | --------- | ||
3 | Dimensional variation after heating/ 100% ≤ | 2.0 | 1.0 | 0.5 | |
4 | Low temperature flexibility | -40ºC (no crack) | |||
5 | Impermeability | 0.3MPa, 2h , impermeable | |||
6 | Compression resistance | 0.5kg.m (no penetration) | |||
7 | Tear strength of overlapping / N/mm ≥ | 4.0 | 3.0 | ||
8 | Water absorption (70 ºC 168h) / % ≤ | 4.0 | |||
9 | Heat aging (80ºC) |
Time duration | 672h | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low-temperature flexibility | -40ºC (no crack) | ||||
10 | Chemical resistance |
Appearance | No bubble, crack, delamination, or pinhole | ||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength/ % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) | ||||
11 | Artificial Weathering |
Time duration | 1500hb) | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break / ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) |