Customization: | Available |
---|---|
Certification: | CE, ISO, MSDS |
Color: | Grey |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Crafted from superior thermoplastic polyolefin (TPO) material, which combines the unparalleled weldability of propylene-alpha-olefin copolymer resins derived from cutting-edge polymerization processes, and the robust durability of polypropylene resins, Canlon TPO-L is an advanced composite thermoplastic polyolefin polymer waterproof membrane, enhanced with non-woven fleece backing through revolutionary processing technology. It is ideally designed for the fully adhered roofing system.
Each standard roll is meticulously encapsulated in polyethylene film. The width is 2.0m, and the length varies according to the membrane's thickness.
NO. | Item | Value | |||
Smooth one (Category H) |
Fiber fleece-backed (Category L) |
Reinforced with polyester scrim (Category P) | |||
1 | Thickness of resin attaching to embedded scrim/ mm ≥ | ---------- | ---------- | 0.4 | |
2 | Tensile property | Max tensile force / N/cm ≥ | ---------- | 120 | 250 |
Tensile strength/ MPa ≥ | 12.0 | ---------- | ---------- | ||
Elongation at break/ % ≥ | 500 | 250 | --------- | ||
3 | Dimensional variation after heating/ 100% ≤ | 2.0 | 1.0 | 0.5 | |
4 | Low temperature flexibility | -40ºC (no crack) | |||
5 | Impermeability | 0.3MPa, 2h , impermeable | |||
6 | Compression resistance | 0.5kg.m (no penetration) | |||
7 | Tear strength of overlapping / N/mm ≥ | 4.0 | 3.0 | ||
8 | Water absorption (70 ºC 168h) / % ≤ | 4.0 | |||
9 | Heat aging (80ºC) |
Time duration | 672h | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low-temperature flexibility | -40ºC (no crack) | ||||
10 | Chemical resistance |
Appearance | No bubble, crack, delamination, or pinhole | ||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength/ % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break/ % ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) | ||||
11 | Artificial Weathering |
Time duration | 1500hb) | ||
Appearance | No bubble, crack, delamination, or pinhole | ||||
Retention rate of max tensile force / % ≥ | ---------- | 90 | 90 | ||
Retention rate of tensile strength / % ≥ | 90 | ---------- | ---------- | ||
Retention rate of elongation at break / ≥ | 90 | 90 | ---------- | ||
Low temperature flexibility | -40ºC (no crack) |